Hobbyboss has four
new items for release in the June - a B model Black Widow in a popular scale, a
Russian light tank so obscure it has only been in the world of Tanks game, the end
genesis of the Corsair which was really a Pirate and a German mini metal box on
4x4 wheels. We thought you would want a look at the sprues and markings in
today’s preview…
Hobbyboss new items for June 2015
Model: #81731
Model Scale: 1:48
Since starting to focus on night interdiction the United
States Army Air Force the success rate was higher than ever before. To counter
the enemy night bombing campaign, a series of night fighters began to be put
into use. In 1940 the Americans began their night fighter project research but
it was not until 1943, on 10 May P-61 before the "Black Widow" came
into service, they have been using the Douglas P-70 "Havoc" and British
"Beaufighter" to compete with the Japanese up until that point.
The military began to upgrade their P-61 to accommodate this
new and more powerful airborne interception radar, the SCR-720C. These aircraft
equipped with a SCR-270C radar was named P-61B black widow. The “B” type to
accommodate the lengthened nose radar and the designers also reinstalled the turret
in the later aircraft in the batch.
Model Features:
Model Size
Length: 318.3mm Wingspan: 420mm
The total number of
parts
140 +
The total number of
offset
11 sprues
Metal parts
ballast
the Kit Consists of
over 140 Parts
-Detailed Fuselage
& Wing w / Accurate Design
-Detailed Engine
& Cockpit
-Metal Parts included
The completed kit
Model: #83827
Model Scale: 1:35
T-50 light tanks was used as an infantry support tank in
World War II by the Soviet Union in the early development of light infantry
tanks. The chassis design has many advanced features, but its hull featured a complex
construction and so it was expensive to produce.
Over only a very short production
time, only 69 were built. In addition, to achieve mass production of the tank
the Soviet Union did not think it necessary to continue production, so T-50 production
was ceased after an extremely short run.
Kit details.
Model Size
Length: 149 mm Width: 70mm
The total number of
parts
700+
The total number of
offset
16 sprues, lower hull, upper hull and turret
Etched Parts 1 pc
The Kit Consists of
over 700 Parts
- Multi-directional slide Moulded Turret &
Lower hull
- Photo-etched Parts included
- 256 Individual Tracks Links
Model: #80390
Model Scale: 1:48th
F4U-5 was the last production of the US Navy propeller
driven Corsair and it was an evolution of the earlier F4U-4 model. The modified
F4U-4 (BuNo.27296) used at the time the most advanced technology to make a
prototype on 1945 on 12 May 21 May when it completed its first flight.
F4U-5 featured an elongated nose to accommodate the 2300 hp
R-2800-32W engine and automatic adjustment of the turbocharger. The canopy was
redesigned but the Pirate did not feature in large numbers because of the
oncoming of the Jet technology. Since 1945 F4U-5 production was eventually
restricted to just 233 aircraft.
Model features
Model Size
Length: 215mm Wingspan: 260mm
The total number of
parts
200+
The total number of 12
sprues
The Kit Consists of
over 200 Parts and Parts for canopy 10 Clear.
- Detailed Fuselage
& Wing w / Accurate Design
- Engine with Fine
Detail
- Detailed Gear Cabin
The completed model
Model: 83811
Model Scale: 1:35
From 1935 to 1944 years Nazi Germany developed a series of
4X4 armoured vehicles that they used as light reconnaissance vehicles. Using
the standard sPkw I Horch 801 type heavy truck chassis and a polygon armoured
body and turret with a rear mounted engine of 67 kW ( 90 hp) Horch 3.5- litre
gasoline engine the German Sd.Kfz.221 was much used especially in the
blitzkrieg and early on in the east. With a road speed of 80 km/hour, & a cross-country
speed of 40 km / h this little armoured car’s range was about 300 km.
Initially attached to
armoured division reconnaissance battalions, they saw a lot of action and were
well suited to the European countries have a good road network, thought the poor
mobility was a weakness when these served on both the Eastern and North African
battlefields. Their harsh geographical environment limited the use of the car.
In turn these were replaced by the Sd .kfz 250 half-track.
Model Features
Model Size
Length: 134mm Width: 57mm
The total number of
parts
310+
The total number of 14
sprues, including upper hull and lower hull
Photo-etched Parts
included - 2 sheets
All of these kits
will be available through Hobbyboss’ Distributors worldwide this month...