How to use shaders to create weathering effects & other techniques
Solution Book
A.MIG-6524
Book, soft cover
68 pages in full colour
Multilingual
9,95 €
The AMMO SHADERS are a new type of product designed to create a variety of effects on all types of models in simply and easily. The transparent and ultra-fine range of colours allows all skill level of modeler to apply stunningly realistic effects. From fading effects to wear and tear, shadows and highlights, altering base colours to altering hues, this new range can even be applied to effect base colours as an airbrushable filter.
In this book, José Luis López will show you all the secrets of working with these new products in order to get the most out of their special characteristics. Cover to cover, exhaustive step-by-step guides explaining how to paint a 1/48 Tamiya T-55 in a generic desert scheme, including how to paint the base coat as well as chipping, dust, streaking, rust, grease and soot effects, and all manner of universally useful techniques!
AMMO's New Plasticators!!
AMMO presents you with a new surface preparation solution for all modeling materials. Using the latest technology, we present the ideal solution for preparing any porous material, enabling paint adhesion to any surface. This will save both time and the amount of paint required to cover absorbent surfaces.
With Plasticator products you can give any surface the texture of plastic, allowing you to paint on materials that prevent proper paint adhesion such as plaster, cardboard pieces, balsa & other woods, and laser cut paper kits. This product seals paper parts, very porous materials such as plaster, and all types of wooden surfaces which also have porous surfaces that would otherwise absorb your paints and require large amounts just to cover the surface.
Plasticator is available in two different densities:
Plasticator Thin A.MIG-2075 and Plasticator Thick A.MIG-2076. Both are non-toxic and water soluble for easy clean up. If you want to know more about how to use Plasticator references, click here.
Plasticator Thick
Reference: AMIG2076
3,95 €
Jar 40mL
Surface preparation solution for any porous material, enabling paint adhesion to any surface.
Plasticator Thin
Reference: AMIG2075
Jar 40mL
3,95 €
Surface preparation solution for any porous material, enabling paint adhesion to any surface.
Caunter British CAMO SET
A.MIG-7181
Acrylic colours set. 6 jars 17mL
13,80 €
A compilation of the specific colours used most by the British Army during the Second World War in North Africa and the Mediterranean Theatres, enabling you to represent one of the most unique camouflages used during the conflict. In addition to tanks, these colours were also used to camouflage trucks, motorcycles, tractors and artillery.
Included colors in this Set:
A.MIG-0029 Desert Sand
A.MIG-0030 Sand Yellow
A.MIG-0063 RLM 76 Pale Grey
A.MIG-0087 RAL 6014 Gelboliv
A.MIG-0110 SCC 1A (British Brown 1941-42)
A.MIG-0111 SCC 2 (British 1941-42 Service Drab)
DAK Uniforms (Afrika korps) Set
Acrylic colours set for figures. 6 jars 17mL
A.MIG-7038
13,80 €
This pack includes the 6 colours for painting the famous uniforms used by the German forces in North Africa during World War II under the leadership of Field Marshal Erwin Rommel, the Desert Fox. Includes the range of tones used to accurately represent the different variations used by the DAK forces.
Included colors in this Set:
AMMO.F-503 Dark Olive Green
AMMO.F-505 Pale Yellow Green
AMMO.F-514 Field Grey Shadow
AMMO.F-533 Dark Brown
AMMO.F-535 Italian Green Camo
AMMO.F-546 Ochre Brown
Cold War Vol 2 Soviet Fighters - Bombers Set
Acrylic colours set. 6 jars 17mL
A.MIG-7239
13,80 €
Product Link on the AMMO Website
High-quality acrylic colours specifically designed to represent the camouflage used by iconic Soviet fighter-bombers during the Cold War, including the Su-25, Su-17 or MiG-27. With this set, you will be able to paint the complex schemes used by the former Soviet Union consisting of 4 to 5 different colours.
Included colors in this Set:
A.MIG-0051 Medium Light Green
A.MIG-0058 Light Green Khaki
A.MIG-0063 Pale Grey
A.MIG-0076 Brown Soil
A.MIG-0135 Burnt Cinnamon
A.MIG-0206 FS34079 BS641
Cold War Vol 1 Soviet Fighters Set
Acrylic colours set. 6 jars 17mL
A.MIG-7240
13,80 €
This high-quality acrylic paint set includes six accurate colours for painting the most common camouflage schemes used by iconic Soviet fighters during the Cold War, including the MiG-21, MiG-23, and Su-15. With this set, you will be able to paint the complex schemes used by the former Soviet Union consisting of 4 to 5 different colours.
Included colors in this Set:
A.MIG-0027 German Sand Beige A.MIG-0065 Forest Green
A.MIG-0070 Medium Brown A.MIG-0135 Burnt Cinnamon
A.MIG-0220 Interior Green A.MIG-0271 Air Superiority Blue
IA-58 Pucará FAA Colors Set
Acrylic colours set. 6 jars 17mL
A.MIG-7242
13,80 €
Set of six high quality acrylic colours for painting two common schemes of the IA-58 Pucara of the Argentine Air Force. These camouflage patterns belong to the aircraft in service during the Falklands War in 1982. The colours are based on period photographs and documents to ensure accurate colours
Included colors in this Set:
A.MIG-0025 FS 33446 US Modern Vehicles
A.MIG-0244 Duck Egg Green (BS216)
A.MIG-0271 FS35450 Air Superiority Blue
A.MIG-0023 Protective Green
A.MIG-0064 Earth Brown
A.MIG-0263 IJN Medium Grey
Panzer III Tools
Printed in resin with the latest
1/35
3D technology.
A.MIG-8131
6,50 €
Can be used on any Panzer III in 1/35th scale.
Suitable for models from all manufacturers.
Panzer IV Tools
A.MIG-8132
1/35
Printed in resin with the latest
3D technology.
8,75 €
Can be used on any Panzer IV in 1/35th scale.
Suitable for models from all manufacturers.
Panther Tools
A.MIG-8133
1/35
Printed in resin with the latest
3D technology.
7,95 €
Can be used on all Panthers in 1/35th scale,.
Suitable for models from all manufacturers.
German Tools for Tiger I (Early & Mid)
A.MIG-8134
1/35
Printed in resin with the latest
3D technology.
7,50 €
Can be used on all Early & Mid Tigers
in 1/35th scale.
Suitable for models from all manufacturers.
Late Tiger I Tools
1/35th
A.MIG-8135
Printed in resin with the latest
3D technology.
7,50 €
Can be used on all late Tigers in 1/35th scale.
Suitable for models from all manufacturers.
Panzer 38(t)/Hetzer Tools
1/35
A.MIG-8136
Printed in resin with the latest
3D technology.
7,00 €
Tools for the WWII German tank Panzer 38(t) and the Jagdpanzer 38 light tank destroyer. Can be used on all Panzer 38(t)s and Hetzers in 1/35th scale.
Suitable for models from all manufacturers.
Sd.Kfz 234/2 Puma Tools
1/35
A.MIG-8137
Printed in resin with the latest
3D technology.
6,50 €
Can be used on all Sd.Kfz. 234 Pumas in 1/35th scale.
Suitable for models from all manufacturers.
Dented US Fuel Cans
A.MIG-8145
1/35
Printed in resin with the latest
3D technology.
12,50 €
Can be used on all US and Allied vehicle types and scenes in 1/35th scale, as well as captured by Axis troops.
Suitable for models from all manufacturers.
Browning M1919 with M20 AA Mount
A.MIG-8148
1/35
Printed in resin with the latest
3D technology.
9,95 €
Browning .30 calibre machine gun with M20 anti-aircraft mount, used on many US WWII armoured and soft-skin vehicles types.
Suitable for models from all manufacturers.
NbKWrf 39 Smoke Discharger for Puma
A.MIG-8149
1/35
Printed in resin with the latest
3D technology.
8,75 €
Smoke grenade launchers used on the WWII German armoured car Sd.Kfz. 234/2 Puma.
Suitable for models from all manufacturers.
Titans Hobby Spray Primers
State-of-the-art spray primer system made from the best materials and pigments to provide a completely smooth and durable surface on metal, plastic, and resin surfaces. Any type of paint including acrylics, lacquers, or enamels can be applied by brush and airbrush over this primer. Thanks to its perfect finish and the variety of shades available, this primer can also be used as base colour. The spray can features an ergonomic nozzle that provides complete control when spraying, allowing you to lay down a very thin layer without loss of detail.
TITANS HOBBY Bone White Matt Primer
Spray Can 400 mL
for plastic, metal and resin
TTH116
10,95 €
TITANS HOBBY Gun Metal Primer
Spray Can 400 mL
for plastic, metal and resin
TTH117
10,95 €
Scribing Tape - Straight Edge
(5mm x 3M)
A.MIG-8246
4,95 €
Rigid tape specially designed for scribing straight panel lines and engraving rivet lines on any type of model including aircraft, AFVs, ships, buildings, and Mechas. Thanks to the clear material used, you are able to see exactly where the tape is in relation to surface details and use references to place it in the correct position. This tape provides strong adhesion which ensures no movement when using the scriber or riveting tool. In addition, this also makes it possible to reuse the tape several times before it loses its adhesion. Although the edge is rigid, the tape is flexible enough to be adapted to curved surfaces while maintaining a true scribing edge and can be easily cut with scissors. This product will not leave adhesive residue and can be used on plastic, resin, metal, and a range of materials common to scale modelling.
AMMO for Life Foundation Bracelet - Available in two sizes: 190mm and 170mm.
AMMO for Life Foundation Bracelet - (Yellow)
LARGE (190,00 mm)
A.MIG-8058
1€
AMMO for Life Foundation Bracelet - (Yellow)
SMALL (170,00 mm)
A.MIG-8058S
1 €
Testarossa Photo-Etched Bender
Tool for bending photo etched parts, rods, and metal parts
TTH001
110 €
The precision and speed of a legend has inspired us to bring you the TESTAROSSA PHOTO ETCHED BENDER, the ultimate tool for bending photo etched parts, rods and other metal parts with total precision.
With the most complete and innovative design of the Testarossa PHOTO ETCHED BENDER, you will be able to bend both the small and large photo etched parts with precision.
Manufactured under the most demanding of quality standards in Europe and machined to the highest tolerances from steel and aluminium of the highest quality, the TESTAROSSA precision machining has no equal in the market.
All of these new products are now available on the AMMO Website...