The Modelling News: Preview: AK Interactive's August accessories are availavle...

AK Interactive has three new specially picked paint sets (with bonus figures for a short time), some valuable water that won't cost you the shirt off your back in August. See a little more about them in our preview...

Preview: AK Interactive's August accessories are availavle...

STANDING WATER (2 COMPONENT RESIN)

SKU: AK8231

Content: 180ML (120 resin + 60 hardener). Contains 2 syringes.

Price: 22,95€

Product Link on the AK Interactive Website

This is a two-component coloured resin with low odour, intended to simulate standing water in scenes, dioramas, etc. The resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box. Mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours.

The components should be mixed thoroughly, stirring the mixture. It is advisable to avoid stirring during the curing process to avoid the generation of air bubbles that will be trapped. Pour in an enclosed space without cracks to contain the liquid. Recommended thickness up to 5cm.

This is a two-component coloured resin with low odour, intended to simulate radioactive and toxic water in scenes, dioramas, etc. Two-component epoxy type resin with low odour. Resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box. Mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours. The components should be mixed thoroughly, stirring the mixture. It is advisable to avoid stirring during the process to avoid the generation of air bubbles that will be trapped. Pour in an enclosed space without cracks to contain the liquid. Recommended thickness up to 5cm.

RADIOACTIVE WATER (2 COMPONENT RESIN)

SKU: AK8232

Content: 180ML (120 resin + 60 hardener). Contains 2 syringes.

Price: 22,95€

Product Link on the AK Interactive Website

This is a two-component coloured resin with low odour, intended to simulate radioactive and toxic water in scenery, dioramas, etc. This is a two-component coloured resin with low odour, intended to simulate standing water in scenes, dioramas, etc. The resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box. Mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours.

SIGNATURE SET – RAFA “ARCHIDUQUE” – SUDAN CAMPAIGN 1881-1899 – 28MM WARGAME PAINT SET

SKU: AK11773

Price: 45€

Product Link on the AK Interactive Website

This set contains a personal selection by Rafa Archiduque of shades for painting 28mm miniatures for the Sudan Campaign.

The shades can also be extrapolated to figures of other scales. Although the range of shades could be much wider, you will find the necessary colours for projects of this war. The shades are selected to paint 28mm miniatures with the triad system, a base color plus one, two or even three lights if necessary.

The Sudan campaign was a British colonial war that lasted from 1881 to 1899 and pitted the followers of the Madhis (Ansar) against British forces and the Khedivate of Egypt. The British army at first wore its characteristic scarlet jacket, then during a period of the campaign they wore a grey uniform and finally the khaki one. Some units such as the Camel Corps had a blue-grey jacket. The Egyptian infantry had a white uniform in summer and blue in winter with a red fez.

The clothing of the Madhis (Ansar) was very colourful, using fabrics of different shades of white and a range of cream, beige and earth tones. Later, they also used a type of clothing called jibbah in which colourful geometric patches were typical.

This set contains the colours:

AK11001 White

AK11012 Sky Grey

AK11166 French Blue

AK11004 Ivory

AK11007 Rock Grey

AK11115 Light Earth

AK11033 Dark Sand

AK11053 Radiant Flesh

AK11034 Medium Sand

AK11124 Middle Stone

AK11121 Tan Earth

AK11101 Orange Brown

AK11091 Carmine

AK11087 Scarlet Red

AK11401 Base Flesh

AK11434 Red Brown

AK11405 Dark Shadow Flesh

AK11110 Leather Brown

BASILEAN ABBESS – WARGAME STARTER SET – 14 COLORS & 1 FIGURE

SKU: AK11770

Price: 39,95€

Product Link on the AK Interactive Website

This special set that included 14 colours and a 28 mm scale figure of Kings of War by Mantic.

The tones are selected to paint the particular figure but also to increase our range of colours for painting any kind of figures.The 3Gen range is currently the most valued paints by painters all over the world. The formula contains pigments of high purity and high concentration to obtain more vivid colours and a perfect finish for any project.

The figure in the set represents a 28 mm scale Basilean Abbess to play Kings of War in the basilean faction or you can use in any other board game.

This set contains:

AK11004 Ivory

AK11028 Smoke Black

AK11037 Pastel Yellow

AK11039 Purulent Yellow

AK11123 Japanese Brown

AK11435 Field Drab

AK11127 British Khaki

AK11098 Black Red

AK11063 Brown Rose

AK11060 Sickly Pink

AK11050 Light Flesh

AK11067 Magenta

AK11177 Ducat Blue

AK11175 Sky Blue

NORTHERN ALLIANCE THEGN – WARGAME STARTER SET – 14 COLORS & 1 FIGURE

SKU: AK11771

Price: 39.95€

Product Link on the AK Interactive Website

This special set including 14 colours and the figure Thegn of the Northern Alliance, from Mantic in 28 mm scale.

The colours are selected to paint this figure and to increase our range of colours to paint any kind of figures. The 3Gen paints are currently the best valued by painters around the world. Its formula contains pigments of high purity and high concentration to obtain more vivid colours and a perfect finish in any type of project.

The figure included in the set represents a Thegn warrior in 28 mm to play Kings of War in the Northern Alliance or to be used in any other board game or project.